NAD Theater 216THX User Manual
Page 2
SPECIFICATIONS - NAD 216THX
Stereo Mode
Continuous Average Output Power
125W (21dBW)
(Minimum power per channel, 20Hz-20kHz both channels driven, with no more than rated distortion)
Rated distortion
(THD 20Hz-20kHz)
0.03%
Clipping power
(maximum continuous power per channel)
160W
IHF dynamic headroom at 8ohms
+1.3dB
IHF dynamic power
8
170W (22.3dBW)
(maximum short term power per channel)
4
280W (24.5dBW)
2
400W (26dBW)
Slew rate
>70V/sec
Damping factor
(ref. 8ohms, 50Hz)
>200
Input impedance
60k
+ 500pF
Input sensitivity
(for rated power into 8ohms)
1.1V
Voltage gain
x 28.3 (29dBW)
Frequency response
20Hz-20kHz
±0.2dB
-3dB at
2Hz/100kHz
Signal/Noise ratio
ref 1 W
98dB
ref. rated power
119dB
THD + SMPTE I.M. + IHF I.M.
<0.03%
Bridged (Monophonic) Mode
Continuous Average Power Output into 8ohms
400W (26dBW)
(Minimum power per channel, 20Hz-20kHz,both channels driven, with no more than rated distortion)
IHF dynamic headroom at 8ohms
+1.5dB
IHF dynamic power
8
560W (27.5dBW)
(maximum short term power per channel)
4
800W (29dBW)
Physical Specifications
Dimensions
(W x H x D)
435 x 146 x 383 mm
Net weight
14.2kg
Shipping weight
16kg
NOTE: NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.