NeoDigits.com X3000 HD - Manual (Page 18)

• Wireless connection to an Access Point
You can connect HELIOS X3000 to your network wirelessly by first clicking on
your remote control. Once you enter the setup menu, choose to get to the
submenu. Once in settings, you need to switch the “preferred network” to
wireless (the default is wired) and then reboot the player. After rebooting, go to
settings again to setup the parameters to your wireless AP (Access Point).
• Wireless connection to an Ad-Hoc network
If your wireless network does not use a wireless router / switch or you only have 1
wireless computer with no wireless infrastructure, you will need to use the Ad-Hoc