Specifications – Numark Industries M6 User Manual
Page 23
SPECIFICATIONS
INPUTS:
Line:
10 k
Ω input impedance
77 mV rms sensitivity for 1.22 V output
Mic:
600
Ω input impedance unbalanced
1.1 mv rms sensitivity for 1.22 V output
60 mV rms max input
Phono:
47 k
Ω input impedance
1.3 mV rms sensitivity @1 kHz for 1.22V output
OUTPUTS:
Line:
6.7 V rms max
Headphone:
0.5 W into 47
Ω
DISTORTION:
< 0.01%
SIGNAL-TO-NOISE RATIO (maximum output, JIS-A weighted):
Line:
> 96 dB
Mic:
> 94 dB
Phono:
> 79 dB
FREQUENCY RESPONSE:
Line:
20 Hz – 20 kHz (± 0.5 dB)
Mic:
20Hz – 15KHz (± 0.5 dB)
Phono:
±1 dB (except for controlled attenuation of -3dB @ 20Hz to reduce
rumble and feedback)
MICROPHONE TALKOVER: -15 dB
CHANNEL EQUALIZER:
Bass:
+12/-32 dB @ 60 Hz
Middle:
+12/-32 dB @ 1.2 kHz
Treble:
+10/-28 dB @ 15 kHz
DJ MIC EQUALIZER:
Bass:
±12 dB @ 100 Hz
Middle:
±10 dB @ 1.2 kHz
Treble:
+12 dB @ 15 kHz
POWER CONSUMPTION:
9.1 W typical
11.6 W with full headphone output
* Specifications are subject to change
MANUAL VERSION 1.0