Nokia Cellphone 3555c - Manual (Page 37)

M e s s a g i n g
37
MMS creation mode - Allows you to select whether or not to create multimedia
messages with restrictions on content. When selecting Restricted receiving
device is more likely to support sent messages. Select Free enables you to add
various types of multimedia to the message.
Image size in MMS — to set the image size in multimedia messages
Default slide timing — to define the default time between slides in multimedia
messages
Allow multimedia reception — to receive or block the multimedia message, select
Yes or No. If you select In home network, you cannot receive multimedia
messages when outside your home network. The default setting of the
multimedia message service is generally In home network. The availability of this
menu depends on your device.
Incoming multi- media messages — to allow the reception of multimedia
messages automatically, manually after being prompted, or to reject the
reception. This setting is not shown if Allow multimedia reception is set to No.
Allow advertisements — to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No, or Incoming multi- media
messages is set to Reject.
Configuration settings > Configuration — only the configurations that support
multimedia messaging are shown. Select a service provider, Default, or Personal
config. for multimedia messaging. Select Account and an MMS account
contained in the active configuration settings.
E-mail messages
The settings affect the sending, receiving, and viewing of e-mail. You may receive
the settings as a configuration message. See Configuration settings service p. 8.
You can also enter the settings manually. See Configuration p. 50.
Select Menu > Messaging > Message settings > E-mail messages and from the
following options:
Configuration — to select the set that you want to activate
Account — to select an account provided by the service provider
My name — to enter your name or nickname
E-mail address — to enter your e-mail address
Login information — to enter authentication information used when retrieving
incoming e-mail
FCC Draft
Model 3555c - 23 April 2007