NAD C270 - Manual (Page 2)

PROVISIONAL SPECIFICATIONS - NAD C270
Power Amp Section
Continuous Average Power Output into 8
Ω
120W (20.8dBW)
(Min. power per channel, 20Hz - 20kHz both channels driven with no more than rated distortion)
Rated distortion (THD 20Hz-20kHz) 0.03%
Clipping power (max. continuous power per channel) 140W (21.5dBW)
IHF dynamic headroom at 8
Ω
2.4dB
IHF dynamic power 8
Ω
210W (23.2dBW)
4
Ω
340W (25.3dBW)
2
Ω
450W (26.5dBW)
Damping factor ref. 8
Ω
50Hz >150
Frequency response 20Hz-20kHz +/-0.3dB
3Hz/70kHz -3dB
Input impedance R and C 20k
Ω
/ 300pF
Input sensitivity ref. rated power 1.1V
Voltage gain x 28.3 (29dB)
Signal/noise ratio A weighted; ref. 1W >100dB
A weighted; ref. rated power >120dB
Bridged (Monophonic) Mode
Continuous Average Power Output into 8
Ω
300W (24.8dBW)
(20Hz - 20kHz both channels driven with no more than rated distortion)
IHF dynamic headroom at 8
Ω
2.2dB
IHF dynamic power 8
Ω
600W (27dBW)
IHF dynamic power 4
Ω
800W (28.5dBW)
Physical Specifications
Dimensions (W x H x D) 17 1/8 x 5 3/16 x 13 13/16 "
(435 x 132 x 350mm)
Net weight 24.8 lbs (11.2kg)
Shipping weight 31.3 lbs (14.2kg)
NOTE: NAD Electronics International reserves the right to change specifications or features without notice as design improvements are incorporated.
NAD is a registered trademark of NAD Electronics International.
All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written permission of NAD Electronics International.
Printed in Canada. © NAD Electronics International 02/01.