Net Optics 96547iTP - Manual (Page 39)

iTap GigaBit Dual Port Aggregator
35
Figure 31: Net Optics System Manager with iTap
The indicator to the right of the iTap picture blinks green when System
Manager is communicating with the iTap. If the indicator blinks red, check that
the iTap is connected to the network and verify the confi guration information.
7. Repeat Steps 1-6 for each iTap you are adding.
Tip! _____________________________________________________________________
To change the order in which iTaps appear in the System Frame, click and drag
iTaps into the desired order.
__________________________________________________________________________