Eizo T766 - Manual (Page 10)

English
10
2. INSTALLATION
2. INSTALLATION
2-1. Connecting the monitor to the PC
NOTE
• Be sure that the power switches of both of the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Signal Cable Connector PC
Signal Cable (enclosed) D-Sub mini 15 pin
connector Standard Graphics Board
Macintosh G3 (Blue &
White) / G4
Signal Cable (enclosed) +
Adapter* (optional) D-Sub 15 pin
connector Macintosh
* Macintosh Adapter (optional)
2.
Plug the power cord into the power connector at the rear of the
monitor. Then, plug the other end of the cord into a power outlet.