Numark Industries C1 - Manual (Page 3)

1
NORMAL FILTERS FLANGER AUTOPAN L R AUTOCUT FILTERED LOPASS VARI-CUT RATE RATE
BOX CONTENTS
y C1
y IEC Power Cable
y Quickstart Guide
y
Safety Instructions & Warranty Information
REGISTRATION
Please go to http://www.numark.com to register your C1. Registering your product ensures that we can keep you up-to-date
with any last-minute product developments and provide you with world-class technical support, should you run into any
problems.
GROUND RULES
1.
Make sure all items listed in the BOX CONTENTS section are included in the box.
2. READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.
3. Study the connection diagram in this guide.
4. Place mixer in an appropriate position for operation.
5. Make sure all devices are turned off and all faders and gain knobs are set to “zero.”
6. Connect all stereo input sources as indicated in the diagram.
7. Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.
8. Plug all devices into AC power.
9. Switch everything on in the following order:
• Audio input sources (i.e. turntables, CD players, etc.)
•
Mixer
•
Last, any amplifiers or output devices
10. When turning off, always reverse this operation by turning off:
•
Amplifiers
• Mixer
•
Last, any input devices
CONNECTION DIAGRAM
TURNTABLE TURNTABLE
CD BURNER
HOUSE AMP
HEADPHONES
CD PLAYER CD PLAYER CD PLAYER REMOTE MIXER
MICROPHONE