Nokia BH-606 - Manual (Page 6)

ENGLISH
the left ear, detach the earloop (11),
flip it, and push it into place (12).
Calls
To make a call, use your phone in the
normal way when the headset is
connected to it.
To redial the number you last called (if
your phone supports this feature with
the headset), when no call is in
progress, press the answer/end key
twice.
To activate voice dialling (if your
phone supports this feature with the
headset), when no call is in progress,
press and hold the answer/end key for
about 2 seconds. Proceed as described
in the phone user guide.
To answer or end a call, press the
answer/end key. To reject a call, press
this key twice.
To set the headset volume, slide the
volume key up or down.
To mute or unmute the microphone
during a call, press the middle of the
volume key.
To switch a call between the headset
and a compatible phone, press and
hold the answer/end key (or the power
key) for about 2 seconds.
Clear settings or reset
To delete the pairings from the
headset, switch off the headset, and
press and hold the power key and the
answer/end key for about 5 seconds.
To reset the headset if it stops
functioning, even though it is charged,
connect the headset to a charger that
is connected to a wall outlet.
Troubleshooting
If you cannot connect the headset to
your compatible phone, check that the
headset is charged, switched on, and
paired with the phone.