NHT iW1 - Manual (Page 2)

Specifications
System Type:
Driver Complement:
Crossover:
Response:
Sensitivity:
Impedance:
Recommended Power:
Inputs:
Weight:
Cutout Dimension:
Bezel Dimension:
Depth behind wall:
Finish:
2-way in-wall design
6.5” polypropylene cone woofer
1” fluid cooled soft dome tweeter coaxially mounted
2.4KHz, 18dB/octave high-pass
and 12dB/octave low-pass
62Hz - 20KHz, +/-3dB
86dB (2.83V at 1M)
8 ohms nominal
10W/ch minimum, 100W/ch maximum
spring clips
7 lbs. each
10 1/4” H 8 1/8” W
11 3/8” H 9 1/4” W
3 1/4”
Matte white (paintable)
iW1
System Type:
Driver Complement:
Crossover:
Response:
Sensitivity:
Impedance:
Recommended Power:
Inputs:
Weight:
Cutout Dimension:
Bezel Dimension:
Depth behind wall:
Finish:
3-way in-wall design
6.5” long-throw polypropylene cone woofer
(2) 1.25” fluid cooled cloth dome midranges
0.75” fluid cooled cloth dome tweeter
4KHz and 1.7KHz
12dB/octave High-pass
12dB/octave band-pass
and 12dB/octave low-pass
62Hz - 20KHz, +/-3dB
86dB (2.83V at 1M)
8 ohms nominal
10W/ch minimum, 125W/ch maximum
Professional grade spring posts
7 lbs. each
10 1/4” H 8 1/8” W
11 3/8” H 9 1/4” W
3 1/4”
Matte white (paintable)
iW2
System Type:
Driver Complement:
Crossover:
Response:
Sensitivity:
Impedance:
Recommended Power:
Inputs:
Weight:
Cutout Dimension:
Bezel Dimension:
Depth behind wall:
Finish:
3-way in-wall design
6.5” long-throw aluminum cone woofer
(2) 1.25” fluid cooled aluminum dome midranges
0.75” fluid cooled aluminum dome tweeter
4.3KHz and 1.7KHz
12dB/octave High-pass
12dB/octave band-pass
and 12dB/octave low-pass
53Hz - 20KHz, +/-3dB
86dB (2.83V at 1M)
8 ohms nominal
10W/ch minimum, 150W/ch maximum
Professional grade spring posts
7 lbs. each
10 1/4” H 8 1/8” W
11 3/8” H 9 1/4” W
3 1/4”
Matte white (paintable)
iW3