NAD T761 User Manual

Page 2

mode can be engaged, adding a natural level of ambience, relying only on the origi-
nal information in the signal.

For remote on/off switching of ancillary components in a system, such as DVD players or
external power amplifiers, the C250 is equipped with a 12V trigger system. When switch-
ing the receiver on, the trigger output is also activated which in turn can activate a 12V
trigger input and switch on the remote devices. By means of 12V trigger input, the T761
itself can be switched on or off by a remote controller. Besides the 12V triggers, the
T761also has an AC switched outlet so you can easily switch other system components on
or off with the remote control or on the front panel.

In keeping with the NAD tradition, the Model T761 provides musical performance, ease of
use and flexibility that is hard to match. This new addition to the NAD line of products is
equally at home in a system for discerning music lovers, as it is in a system for those look-
ing to get the best out of Videos, CDs, Dolby Digital or DTS DVDs.

PROVISIONAL SPECIFICATIONS - NAD T761

Amplifier Section

Power Output:

Surround Mode

5 x 80W (19dBW)

Total Harmonic Distortion

at rated power

0.08%

IM Distortion

at rated power

0.08%

Damping Factor

8 ohms

Input Sensitivity and Impedance

200mv / 50kohms

Frequency Response

5 to 20,000 Hz

±0.8dB

Signal to Noise Ratio

Ref 80W/8 ohms

>99dB

Ref 1W/8 ohms

>80dB

Tuner Section

Input Sensitivity

Mono

16.1dBf

(50-dB quieting)

Stereo

36.1dBf

Frequency Response

30Hz - 15kHz

±1.5dB

Total Harmonic Distortion

Mono

0.25%

Stereo

0.5%

Stereo Separation

at 1kHz

38dB

Signal/noise ratio

Mono

72dB

Stereo

66dB

Physical Specifications

Dimensions (WxHxD)

17 1/8” x 5 3/16” x 13 3/4”
(435 x 132 x 350mm)

NOTE: NAD Electronics International reserves the right to change specifications or features without notice as design improvements are incorporated.

NAD is a registered trademark of NAD Electronics International.