Nextar NXBT-001 - Manual (Page 5)

Warning: Do not attempt to charge the hands-free car kit with any charger other
than the one provided. Using another charger may damage or destroy the hands-
free car kit.
Low battery indicator
When the battery is less than 3.5V, the device will make a sound and a red LED
will flash thrice every 30 seconds.
TURNING THE NXBT-001 ON
Press and hold the button for 3 seconds to turn the NXBT-001 on. You will
hear an audio cue of "Do Re Mi Fa".
TURNING THE NXBT-001 OFF
Press and hold the button for 5 seconds to turn the NXBT-001 off. You will
hear an audio cue of "Fa Mi Re Do".
PAIRING THE NXBT-001
Initial pairing
! With the NXBT-001 OFF, press and hold the button for 5 seconds. You
will hear a BEEP sound, and red & blue LED lights will flash .
! Use your cell phone to search for Bluetooth devices.
! Select "NXBT-001" on your cell phone.
! Your cell phone will request a password. Enter "0000".
! Your cell phone will show that pairing is now complete.
! The NXBT-001 will stand by if the pairing is not successful within 5 minutes.
Auto reconnection
When the NXBT-001 turns off while connected to a cell phone, it will
automatically reconnect to the cell phone when it is turned back on. (Both
devices must be within the required range of 33 feet / 10m.)
When the NXBT-001 and your cell phone are separated by a distance of 33 feet
(10 meters) or more, the NXBT-001 and cell phone will disconnected. When they
are brought back within the required distance, the NXBT-001 will automatically
reconnect with the cell phone.
alternately