NetComm NB3300 - Manual (Page 22)

www.netcomm.com.au Rev.1 - YML632
Page 22 ADSL Modem Router
Gateway using Classical IP
Choose this setting to meet the following conditions:
1. You want to employ NATto share Internet access for all of your computers, as well as
protect them for outside intruders.
2. Your ISP uses Classical IP connection type (use LLC encapsulation and routing protocol)
and provides you with one or more IP addresses when you apply for the service. You can
find more information in the RFC 2684 standard.
■ Specify WAN IP Address Enter the IP address provided by your ISP.
■ Subnet Mask Enter the subnet mask values provided by your ISP.
■ Default Gateway IP Address Your ISP will provide you with the Default Gateway IP
Address.
■ Domain Name Server (DNS) Your ISP will provide you with at least one DNS IP
Address. Multiple DNS IP settings are common. The first available DNS entry is used in
most cases.
Gateway using PPPOE
Choose this setting if:
1. You want to employ NAT to share Internet access for all of your computers, as well as
protect them for outside intruders.
2. Your ISP uses PPPoE as connection mode. You can find more information in the RFC 2516
standard.
■ User Name Enter the user name your ISP provide to you.
■ Password Enter the password your ISP provide to you.