Nexgrill 720-0001-R - Manual (Page 7)

Assembly Instructions
PLEASE READ THE INSTRUCTION CAREFULLY AND FOLLOW STEP BY STEP. Your Beefmaster
Explorer grill is pre-assembled. The only part that you need to assemble is to connect gas regulator into your
grill.
1. Locate the gas regulator. Grasp the regulator with the knob facing directly up. Line up the collar on the
regulator with the open end of the burner tube.
2. Screw the regulator into open end of burner.
3. Once the regulator is in as far as it will go. Turn it so knob is facing to the front of the grill.
Note: Always make sure the regulator is secured in the fully lock-in position before attaching propane cylinder.
4. Be sure gas control knob is in the off position. Refer to the figure below. Check to make sure threaded areas on
cylinder and regulator are clean. Thread propane cylinder to engage threads correctly to achieve proper
connection. Removing propane cylinder. Refer to the figure below. Unthread cylinder from regulator as shown.
- 5 -