NextBase SDV485-B User Manual
Page 58
1. The followings show you how to fit the portable DVD player to the headrest
mount in the car.
1). Take out the headrest mount and fix it on the car chair.
2). Take out the backplate and fit it on the rear side of portable DVD player
Release the straps
Place the two mounting straps over
your headrest with the mount's
sponge facing the headrest .
Secure the mount by tightening
the straps
Fit the Portable DVD Player to
the Headrest Mount or VESA Wall Mounting Bracket
3). Gently slide the portable DVD player down by aligning the backplate groove with the headrest
mount until you hear the click sound. Then the installment is finished.
2. How to fit portable DVD player to the VESA wall mounting bracket
Connect the portable DVD player with the VESA wall mounting bracket with the middle four screw holes (there
are 4 gaskets for using).
Fit the screws in the four screw
where the arrow pointed
holes
Screw Size: M4*8
Gasket Size: 4.3*9*0.8mm
ENG
MOBILE ENTERTAINMENT
57
PDF 文件使用 "pdfFactory Pro" 试用版本创建