Frequently asked questions – NETGEAR Universal WiFi Range Extender WN3000RP User Manual
Page 15
15
Frequently Asked Questions
You can find more information about your product in the User Manual
1.
The Smart Wizard keeps asking me for my passphrase, and
I am sure I have entered the correct passphrase. What can I
do?
It is very likely that the Extender is placed at the borderline of the
range covered by the router. Follow the instructions in the
previous section to resolve this. If you are using WEP security,
make sure that you are typing the wireless key in the correct field.
2.
I connected to NETGEAR_EXT and launched a browser. Why
can’t I see the Smart Wizard?
First, make sure your computer is set up to use DHCP (most are).
Second, make sure the PC to Extender status LED is green and
you have a valid IP address. Finally, re-launch the browser and
enter www.mywifiext.net.
3.
Will the Extender work if I connect it to the router with an
Ethernet cable?
No. The Extender is designed to connect wirelessly to the router.
4.
What are the user name and password to log in to the
Extender?
The user name is admin and the default password is password.
Both are case-sensitive