Nautique 100077 - Manual (Page 185)

8-3
Clean debris from the bowl and screen and rinse parts in fresh
water. Insert the screen, place the O-ring in the groove of the bowl
and screw the bowl on hand tight. Be sure to open the water valve
before starting the engine.
Some engines are equipped with a closed cooling system with a self-
contained reservoir for engine coolant. Self-contained systems are
equipped with a heat exchanger which uses raw water to cool the
coolant. All raw water systems are equipped with a valve and
strainer.
CORC029
MIN
MAX
ENGINE COOLANT FILL
MAX. and Min. indicators below
See Owners Manual
OFF
ON ON
RAW WATER
STRAINER RAW WATER
STRAINER
VALVE VALVE
Care and Maintenance
D-Drive Sec 8_2010:Nautique Ski Sec 8.qxd 7/28/09 9:13 AM Page 8-3