Northern Industrial Tools 143384 - Manual (Page 2)

For technical questions and replacement parts, please call 1-800-222-5381.
Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO.,
INC. Product! For future reference, please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read
the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment
strongly recommends this machine is not modified and/or used for any
application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have
first contacted Northern Tool + Equipment to determine if it can or should be
performed on the product.
INTENDED USE
The Rotary Hammer Drill is specifically designed for fast impact drilling of anchor holes and
through holes for concrete and masonry.
TECHNICAL SPECIFICATIONS
Description Specifications
Motor: 120V, 60Hz, 7.6 Amps
No load speedd: 800 RPM
Impacts: 3100 BPM
GENERAL SAFETY RULES
WARNING! Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
WARNING! The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
• Keep work area clean and well lit. Cluttered and dark work areas can cause accidents.
1