beautypg.com

Identification of controls introduction – NAD T531 User Manual

Page 5

background image

GB

5

REAR PANEL

IDENTIFICATION OF CONTROLS

Introduction

S-VIDEO OUT jack

AUDIO OUT (L/R) jacks

VIDEO OUT jack

POWER CORD

Connect to an AC 110-240V, 50/60Hz outlet only.

COAXIAL DIGITAL AUDIO OUT jack

VIDEO OUTPUT SELECT Switch

OPTICAL DIGITAL AUDIO OUT jack

Remove the dust protection cap from the connector and

connect the optical digital cable (not supplied) firmly so

that the configurations of both the cable and the

connector match. Keep the dust protection cap and

always reattach the cap when not using the connector

to protect against dust.

Dust protection cap

TO TV (SCART) jack

TV SYSTEM SELECT Switch

Refer to explanation below

TV SYSTEM SELECT

You can enjoy NTSC or PAL discs by using your TV SYSTEM SELECT switch to choose the appropriate system.
If you try to play back PAL disc with NTSC-TV. The player will not playback the disc.
When the selected TV SYSTEM SELECT switch does not coincide with the system of your TV, normal colour picture may not be displayed.
Select the TV SYSTEM SELECT switch when the power is turned off.
When you playback NTSC disc with PAL-TV, some discs may produce black bands at the top and bottom of the screen.

Position of TV SYSTEM SELECT switch

Connected TV

Available disc

PAL

PAL

NTSC/PAL DVD disc

NTSC

NTSC

NTSC DVD disc

AUTO

MULTI SYSTEM TV

NTSC/PAL DVD disc

T531 manual (GB) 6/11/01 11:13 pm Page 5