NAD 116 - Manual (Page 7)

GB
NAD
7
TROUBLESHOOTING.
NO SOUND
Power AC lead unplugged or power not switched on.
Check AC lead.
Tape 1,2 Monitor selected. De-select Monitor mode.
Mute on. Switch off Mute.
Connector to power amp not fitted correctly. Check connections.
Internal fuse blown. Consult dealer.
NO SOUND ONE CHANNEL
Balance control not centered.
Center Balance control.
Connector to power amp not fitted correctly. Check connections.
Input lead disconnected or damaged. Check leads and connections.
PROBLEM ON PHONO INPUT ONLY
No signal
Check MM-MC switch set correctly
Hum on Phono input. Check phono earth lead is connected
Weak or Distorted signal. Check the turntable is connected to the correct
MM or MC phono input
WEAK BASS/ DIFFUSE STEREO IMAGE
Speakers connected to power amplifier wired out of phase.
Check connections to all speakers in the system.
REMOTE CONTROL NOT WORKING
Batteries flat, or incorrectly inserted.
Check or replace batteries.
IR transmitter or receiver windows obstructed. Remove obstruction.