Notification settings – Nokia Remote Camera User Manual

Page 44

C o n f i g u r e t h e s e t t i n g s

Tip: If you are using Remote Camera Manager, select Settings >
Time settings. When you have made all the necessary
configurations, select Options > Send to send the changed
settings to the camera. To see the current time settings in the
camera, select Options > Get current settings.

Notification settings

The master user can set the camera to send notification text messages
when:

• The battery is low, and the camera shuts down.

• The temperature in the camera premises drops too low or rises too

high for the camera to operate, and the camera shuts down.

• The camera switches on after a power cut.

• The camera switches on after a temperature limit violation.

• There is a power cut, and the back-up battery is in use.

• Motion detection is disabled.

• Timed imaging is disabled.

• Motion detection is on, and the camera is shut down with the power

button.

To set on the notifications, send the following text message to the
camera:

To set off the notifications, send the following text message to the
camera:

To check whether the notifications are in use, send the following text
message to the camera:

By default, the notifications are in use.

If you are using Remote Camera Manager, select Settings > General
to find this setting.