Newcon Optik LAM 10M IR User Manual
Page 16
13
6.
Maintenance, storage and
transportation
6.1. General
LAM is a sophisticated precise optical instrument equipped
with electronics. Therefore, it should be handled with due
care.
-
Never disassemble LAM.
-
Keep away from direct sunlight, impacts, dust, moisture,
and sharp changes of temperature.
-
Do not keep LAM at temperatures higher than 60
o
C
(140
o
F). Keep away from heating appliances and central
heating.
-
Do not touch the optical surfaces with fingers. Doing so
may damage the anti-reflection coating.
-
Avoid shocks and sharp jolts.
-
Clean optical surfaces only with professional camera lens
cleaning supplies.
-
Use soft clean cloth to wipe the exterior of LAM.
-
Remove battery when storing for long period of time.
-
All repairs must be performed by an authorized service.
-
If LAM was exposed to salt water it should be rinsed in
fresh water and dried on air at no more than 60
o
C.