Car kit installation – Nokia CK-300 User Manual

Page 10

C a r k i t i n s t a l l a t i o n

2. Car kit installation

For instructions on installing the car kit parts in a vehicle, refer to the
user and installation guide. Observe the following safety guidelines
when installing the car kit.

• Only a qualified service technician should install or service the car kit

using the approved original Nokia parts supplied in the sales
package. Faulty installation or service may be dangerous and may
invalidate any warranty which may apply to the car kit.

End users should remember that the car kit comprises complex
technical equipment that requires professional installation using
special tools and expert know-how.

• Instructions given in the user and installation guide are general

guidelines that apply to the installation of the car kit in an
automobile. However, due to the wide variety of car types and
models available on the market, the guide cannot consider the
individual technical requirements relevant to any particular vehicle.
Contact the vehicle manufacturer for detailed information about the
vehicle in question.

• The car kit is suitable for use only in vehicles with 12-V, negative

grounding. Use on other supply voltages or alternative polarity will
damage the equipment.

• Remember that modern automotive systems include onboard

computers where key vehicle parameters are stored. Improper
disconnection of the car battery may cause loss of data,
necessitating extensive effort for reinitialization of the system. If you
have any concerns, contact your car dealer before any installation
work is done.

• Do not wire the car kit equipment to the high-voltage lines of the

ignition system.

• When installing the parts of the car kit, ensure that none of them

interfere with or hinder the steering or braking systems or other
controls or systems used in the operation of the vehicle (for example,