NorthStar Navigation Pilot System NS3300 - Manual (Page 8)

8
Northstar NS3300 Pilot
To manually steer the boat:
1. Press the key. The autopilot is now disengaged and you have complete steering control.
To manually steer the boat using the autopilot to move the rudder:
1. Ensure the autopilot is in STBY by pressing the key.
2. Press and hold or to turn the rudder to port or starboard. Pressing Both will center the rudder
3. Release the button when the rudder is in the desired position.
Alternatively:
1. Ensure the autopilot is in STBY by pressing the key.
2. Turn the Control Dial until the on-screen rudder indicator is in the desired position.
3. The autopilot will turn the rudder until it is in the target position.
2-7 Manually steering the boat from the boats helm
2-8 Manually steering the boat using power steering