beautypg.com

Nady Systems CMX-16A User Manual

Page 13

background image

S P E C I F I C AT I O N S

3. FREQUENCY RESPONSE

ANY INPUT TO
ANY OUTPUT ....................20 Hz to 20 KHz =/- 3dB @ 0 dBm

4. TOTAL HARMONIC DISTORTION

ANY INPUT TO
ANY OUTPUT ..............0.02%, 20 Hz-20 KHz @ 1Khz, 0 dBm

5. INPUT CHANNEL EQUALIZATION

High shelving ....................12 kHz, +/- 15 dB, Q fixed at 2 oct.
Mid bell ............................2.5 khZ, +/- 15 dB, Q fixed at 1 oct.
Low shelving ......................80 Hz, +/- 15 dB, Q fixed at 2 oct.

6. GAIN CONTROL RANGE

Input channel trim control....Stop to stop- Mic +10 dB~+60 dB,
Line ..................................................................+10 dB~+40 dB
Channel/Master Faders ...................................... -

to +15 dB

Aux Send/Aux Master Send ................................Off to +15 dB
Aux Return ..............................................Off to Unity to +20 dB
Tape In Level Control ..........................................Off to +15 dB

7. CROSSTALK @ 1KHZ

ADJACENT CHANNEL INPUTS ......................-78

dB~-68

dB

INPUT TO OUTPUT .......................................... -78 dB~-68 dB

8. HUM AND NOISE

20 Hz-20 Khz, Rs=150 ohms, input TRIM @ 0 dB, input sensi-
tivity at –60 dB
EQUIVALENT INPUT NOISE ....................................-129 dBm
RESIDUAL OUTPUT NOISE........................................-85 dBm

9. VU METERS

10-segment LED X 2, L/G1, R/G2

10. PHANTOM POWER

+48 VDC, globally selected

11. POWER REQUIREMENTS

External PSU, 120 VAC/60Hz or 230 VAC/50Hz

12. POWER CONSUMPTION

40 Watts, External PSU

13. DIMENSIONS AND WEIGHT

15" x 17.5" x 3.75" (381 x 495 x 95 mm), 14.85 lbs (6.75 Kg),
External PSU not included

1. INPUT SECTION

Input Connector Input Impedance Nominal Level Max Level

MONO CH MIC

XLR

>1.3K

+2 dBm

+14 dBm

MONO CH LINE

1/4" TRS

>10K

+4 dBm

+22 dBm

STEREO CH LINE

1/4" TRS

>10K

+4 dBm

+22 dBm

TAPE IN

RCA PIN JACKS

>10K

+2 dBm

+22 dBm

AUX RETURNS

1/4" TS

>10K

+4 dBm

+22 dBm

INSERT IN

1/4" TRS

>10K

+4 dBm

+22 dBm

2. OUTPUT SECTION

Output Connector Output Impedance Nominal Level Max Level

STEREO OUT L/R

XLR & 1/4" TS

120

+4~+6 dBm

+22 dBm

AUX SENDS 1,2

1/4" TS

120

+4~+6 dBm

+20 dBm

G1-G2 OUT

1/4"TRS

120

+4~+6 dBm

+22 dBm

INSERT OUT

1/4" TRS

120

+4~+6 dBm

+22 dBm

CNTRL R. OUT

1/4" TS

1K

+4~+6 dBm

+22 dBm

REC OUT

RCA PIN JACKS

1K

+4~+6 dBm

+22 dBm

PHONES

1/4" TRS

200

–––

40mW X 2

13

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.