NAD AV711 - Manual (Page 2)

SPECIFICATIONS - NAD AV 711
Amplifier section
Power Output: Stereo Mode: 2 x 40 Watts (8 ohms within rated
distortion)
2 x 60 Watts IHF dynamic power 8 ohms
2 x 90 Watts IHF dynamic power 4 ohms
2 x 115 Watts IHF dynamic power 2 ohms
Surround Mode: 3 x 40 Watts (L, C, R)
20 Watts (10 + 10) (S)
Total Harmonic Distortion 0.08% at rated power (Front)
IM Distortion 0.08% at rated power (Front)
Damping Factor 60 at 8 ohms (Front)
Sensitivity and Impedance 150 mV/ 50 kohms
Frequency Response 5 to 50,000 Hz: ± 1 dB
Signal to Noise ratio Line: 100 dB (IHF A)
Tuner section
Input Sensitivity 1.3µV Mono; 2.5µV Stereo
Frequency response 30Hz - 15kHz: ± 1.5dB
Total Harmonic Distortion Mono: 0.15%; Stereo: 0.25%
Stereo Separation 45 dB at 1 kHz
Signal to Noise Ratio Mono: 73 dB; Stereo: 67 dB
Physical specifications
Dimensions (W x H x D) 435 x 145 x 290 mm
Net weight 9.3kg
Shipping weight 10.5kg
NOTE: NAD resrves the right to change specifications or design at any time without notice. All specifications sre those in effect at time of printing.
Dolby and Pro Logic are registered trademarks of the Dolby Laboratories Licensing Corporation