Nilfisk-Advance America E 140.2 - Manual (Page 7)

7
4.2 Mounting of spray
lance and Click & Clean
nozzles
2. Attach the nozzle.
Warning: When
attaching the Click
& Clean nozzles,
the pawl on the
side of the spray
lance should come out again.
Note: The Tor-
nado
® PR noz-
zle and the foam
sprayer feature a swivel lock,
which must be positioned in the
hole in the Click & Clean spray
lance.
Press the pawl to detach the
Click & Clean nozzle.
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
Note: The spray lance (6)
has a built-in low pressure
nozzle that can be used for
fl ushing away dirt.
4.3 Water connection An ordinary 1/2" garden hose of
min. 10 m and max. 25 m will
be suitable.
NOTE: Connec-
tion to the public
mains according
to regulations.
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional fi lter
should be mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
Note: Check
that the fi lter is
fi tted in the water
inlet pipe and that it is not
clogged up.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 50°C).
3. Turn on the water.