NISSAN EPSON Stylus Pro XL-1 - Manual (Page 2)

Paper types: Plain paper and special papers
distributed by EPSON (special coated
paper, high-quality glossy paper, and
transparencies)
Paper thickness: 0.003 to 0.004 inch (0.08 to 0.11 mm)
Paper weight: 17 to 24 lb (64 to 90 g/m
2
)
Use 24 lb (90 g/m
2
) paper under normal
temperature and humidity conditions
Transparencies:
Size Letter (8.5
×
11 inches)
A4 (210
×
297 mm)
Thickness 0.003 to 0.0033 inch (0.075 to 0.085 mm)
Envelopes:
Size No. 10 9.5 × 4.1 inches (241 × 104 mm)
DL 8.7
×
4.3 inches (220
×
110 mm)
Paper types Plain, bond, or air mail paper
Paper thickness Less than 0.020 inch (0.52 mm)
Paper weight 20 to 24 lb (75 to 90 g/m
2
)
Note:
❏ Poor quality paper may reduce print quality and cause paper
jams and other problems. If you encounter problems, switch to a
higher grade of paper.
❏ Print on special coated paper, high-quality glossy paper,
envelopes, and transparency films only under these normal
conditions:
Temperature 59 to 77°F (15 to 25°C)
Humidity
40 to 60% RH
❏ Store high-quality glossy paper under the following conditions:
Temperature 59 to 77°F (15 to 25°C)
Humidity
20 to 60% RH
❏ Use envelopes that do not curl.
❏ The following EPSON genuine papers are available:
S041062 Special coated paper for 720 dpi printing (Letter)
S041067 Special coated paper for 720 dpi printing (Legal)
S041068 Special coated paper for 720 dpi printing (A3)
S041070 Special coated paper for 720 dpi printing (B)
S041069 Special coated paper for 720 dpi printing (Super A3/B)
S041060 Special coated paper for 360 dpi printing (Letter)
S041066 Special coated paper for 360 dpi printing (Super A3/B)
S041065 Special coated paper for 360 dpi printing (A3)
S041072 High-quality glossy paper (Letter)
S041074 High-quality glossy paper (Super A3/B)
S041073 High-quality glossy paper (A3)
S041075 High-quality glossy paper (B)
S041064 Transparency film (Letter)
Printable area:
Single sheets
Envelopes
A The minimum top margin is 0.12 inch (3 mm).
BL The minimum left margin is 0.12 inch (3 mm).
BR The minimum right margin is:
For Stylus Pro:
3.8 mm (0.15 inch) for A4 size paper
3 mm (0.12 inch) for Statement and Executive size paper
9.7 mm (0.38 inch) for Letter and Legal size paper and transparencies
13.8 mm (0.54 inch) for DL envelopes
35.1 mm (1.38 inch) for No. 10 envelopes
For Stylus Pro XL:
3 mm (0.12 inch) for all paper sizes, and envelopes
C The minimum bottom margin is 0.55 inch (14 mm)
Ink Cartridges
Black ink cartridge (S020034):
Color Black
Print capacity* Approximately 1.5 million characters
(315 dots/char, Roman 10)
Cartridge life* 2 years from production date and up to
6 months after opening the package, at
77°F (25°C); based on letter size paper
Temperature Storage: –22 to 104° F (–30 to 40° C)
1 month at 104° F (40° C)
Transit: –22 to 140° F (–30 to 60° C)
1 month at 104° F (40° C)
120 hours at 140° F (60° C)
Freezing:** 24.8° F (–4° C)
Dimensions 1.1 inches (W)
×
2.7 inches (D)
×
1.7 inches (H)
(26.9 mm
×
67.4 mm
×
41.8 mm)
A
BR
C
BL
A
BL BR
C
EPSON Stylus Pro and Pro XL
EPSON Stylus Pro and Pro XL-2 8/1/95 Ink Jet Printers