NEC G 2180 - Manual (Page 12)

Rinse aid indicator
When the Rinse aid indicator first
comes on, there will be enough rinse
aid left for 2 - 3 washes.
^ The rinse aid indicator on the control
panel will light when the rinse aid
reservoir needs refilling.
Adjusting the dosage
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off o.
^ Press and hold the program button
and turn the dishwasher on with g.
Hold the program button until the
lower right program indicator lights.
If it does not come on, start over.
^ Press the program button briefly
three times.
The "Intake/Drain" indicator flashes
three times in intervals.
A rinse aid amount of 3 ml is set by
default.
Before using for the first time
12