Niles Audio MP6 - Manual (Page 20)

1 9
Ins
ta
lla
tion
of
the Speak
er and Grille in Ne
w or Exis
ting Cons
tr
uc
tion
Adjusting the Tweeter
The tweeter is housed in a precision adjust
-
ment mechanism which enables precise
aiming of the directional high frequencies to
provide optimum performance. To adjust
the tweeter:
1. Carefully grasp the tweeter housing by
placing your thumb and forefinger in the
indentations provided.
2. Rotate the tweeter housing either clock-
wise or counter clockwise as required.
The mechanism is indexed at equal
intervals so that both speakers in a pair
can be adjusted equally. Simply count
the number of “clicks” as the first tweet-
er is adjusted. Repeat the process for the
second speaker, rotating the tweeter the
same number of “clicks” in the opposite
direction
(See Figure 18) .
3. Pivot the tweeter on both speakers
equally by depressing the housing at the
arrows until the desired angle is
achieved
(See Figure 19) .
Installing the Grille
Carefully fit the grille into its recess so that it
is barely in place. Starting with one corner,
go around the speaker, pushing the grille in
a little bit each time. You should be gentle,
the aluminum grille can be easily bent out
of shape. The speaker will have an absolute-
ly flush appearance when it is properly
installed.
Figure 18
Figure 19