Navini Networks Ripwave - Manual (Page 26)

Navini Networks, Inc. Ripwave MX Modem User Guide
Connecting the
S-EBP
The Indicator Light
on the S-EBP
The optional battery packs are not installed inside the Modem.
Instead they are connected to the Modem. To connect the S-EBP to
your Modem, plug the battery pack’s pig-tail cord into the input
socket located on the back of the Modem.
The S-EBP has one indicator light that resides on top of the unit.
This light has four states associated with it. The states are
described below.
Battery
LED
Battery
Charger
Connected
Modem
Connected
& Switched
On
Modem
On/Off
Button is
Lit
Comments
Green Yes Not
applicable Not
applicabl
e Battery fully charged.
Amber Yes Not
applicable Not
applicabl
e Battery charging.
Off No Yes Yes Normal. Battery is
supplying power to
Modem. No power is
wasted on the battery
LED.
Red No Yes Yes Battery is supplying
power to Modem. Battery
is low. 5% charge left.
1
Off No Yes No Battery is out of power.
Off No No No Battery LED is off. Status
of battery is unknown.
26
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)