Nokia BH-803 - Manual (Page 15)

B a s i c u s e
15
■ Switch the call between headset and mobile
device
To switch the call from the headset to a connected device, press and hold
the multifunction key for about 4 seconds (the headset switches off), or
use the keys of your device. To switch the call back to the headset, switch
on the headset (and connect it to your paired device), or press and hold
the multifunction key (when the headset is on).
■ Clear settings or reset
To clear all the pairing settings from the headset, press and hold the
multifunction key, and move your finger three times on the touch
sensitive area toward the multifunction key. The indicator light alternates
red, green, and blue twice. After the settings are cleared, the headset
enters the pairing mode for about 5 minutes (the indicator light flashes
blue quickly).
To reset the headset if it stops functioning, although it is charged, plug
the charger into the headset while you press and hold the multifunction
key. The reset does not clear the headset settings.