beautypg.com

5-3 time format options (time format), 5-4 time display options (time display), 5-5 position display options (ll display) – NorthStar Navigation Explorer 710 VHF User Manual

Page 16: 5-6 course & speed display options (cog/sog)

background image

16

Northtstar Explorer VHF Series: 710US, 710EU Operation and Installation Manual

2-5-3 Time Format Options (TIME FORMAT)

Time can be shown in 12 or 24 hour format.

1. Select GPS/DATA, then SETTING.

2. Select TIME FORMAT.

3. Select 12 Hr or 24 Hr as desired. In this example, 12 hour format has been selected and so the LCD

shows the AM or PM suffix.

2-5-4 Time Display Options (TIME DISPLAY)

If you have entered the time manually as described in the previous sections, the time is always shown on
the screen with the prefi x M.

However, if the vessel position is being updated through a GPS navigation receiver, you can switch the time
display on the screen ON or OFF as follows:

1.

Select GPS/DATA, then SETTING.

2. Select

TIME

DISPLAY.

3.

Select ON (on) or OFF (off ) as desired. In this
example, OFF has been selected and so the
screen no longer shows the time.

If the time display is set ON, course and speed data are not displayed on the LCD (see
section 2-5-6).

2-5-5 Position Display Options (LL display)

If you have entered the vessel position manually as described in the previous section, the vessel position is
always shown on the screen with the suffi

x M.

However, if the time is being updated through a GPS navigation receiver, you can switch the vessel position
display on the screen on or off as follows:

1.

Select GPS/DATA, then SETTING.

2.

Select LL DISPLAY.

3.

Select ON (on) or OFF (off ) as desired. In this
example, OFF has been selected and the screen
no longer shows the vessel position.

2-5-6 Course & Speed Display Options (COG/SOG)

Use this option to display course over ground (COG) and speed over ground (SOG) data on the screen.

1.

Select GPS/DATA, then SETTING.

2. Select

COG/SOG.

3.

Select ON (on) or OFF (off ) as desired. In this
example, ON has been selected and so the
screen shows the bearing and speed.

If GOG/SOG is set ON (on), the time is not displayed on the screen (see section 2-5-4).

GPS/DATA

TIME OFFSET

TIME FORMAT

> TIME DISPLY

TIME DISPLY

ON

> OFF

GPS/DATA

TIME FORMAT

TIME DISPLY

> LL DISPLAY

LL DISPLAY

ON

> OFF

GPS/DATA

TIME DISPLY

LL DISPLY

> COG/SOG

COG/SOG

> ON

OFF

GPS/DATA

MANUAL

> SETTING

SETTING

TIME OFFSET

> TIME FORMAT

TIME DISPLAY

TIME FORMAT

> 12 Hr

24 Hr

07:15AM LOC