Nokia HF-300 - Manual (Page 8)

G e t s t a r t e d
8
When battery power is low, the red indicator light flashes slowly.
■ Switch on or off
To switch on, press and hold the power key until the speakerphone beeps
and the green indicator light turns on. The indicator light flashes when
the speakerphone tries to connect to a paired device. When the
speakerphone is connected to a paired device and is ready for use, the
blue indicator lights are displayed.
To switch off, press and hold the power key until all the indicator lights
turn off. If the speakerphone is not connected to a paired device within
about 5 minutes, it switches off automatically to save power.
■ Pair the speakerphone
1. Ensure that your mobile device is switched on, and switch on the
speakerphone. The green indicator light flashes slowly.
2. Activate the Bluetooth feature on the mobile device, and set the
device to search for Bluetooth devices. See the user guide of your
device for instructions.
3. Select the speakerphone from the list of found devices.
4. Enter the Bluetooth passcode 0000 to pair and connect the
speakerphone to your device. In some devices you may need to make
the connection separately after pairing.
If pairing is successful, the speakerphone sounds a beep and appears in
the menu of the mobile device where you can view the currently paired
Bluetooth devices. When the speakerphone is connected with your
mobile device, the blue indicator lights are displayed.
To pair and connect the speakerphone with a new device, disconnect the
speakerphone from the current device, then pair and connect the new
device.
Disconnect the speakerphone
To disconnect the speakerphone from your mobile device, do one of the
following: