NETGEAR 700 Series Managed Switch for Software v2.1 - Manual (Page 95)

700 Series Managed Switch User’s Guide for Software v2.1
Command Line Interface 6-5
SM-10004-02
0 Packet Discards, 0 Packet Errors
IP
The show IP s IP information
Syntax
FSM726# show ip
An example of the display output is shown below.
IP Assignment Mode: Manual
IP address: 169.254.224.1
Subnet mask: 255.255.0.0
Mac-Address-Table
The show mac-address-table command displays a variety of information on the status and
content of the MAC-address-table.
Aging Time
The show mac-address-table aging-timer command is used to display the aging timer of
the mac-address-table.
Syntax
FSM726# show mac-address-table aging-timer
Dynamic
The show mac-address-table dynamic command displays the dynamically learned MAC
addresses.
Syntax
FSM726# show mac-address-table dynamic
An example of the display output is shown below.
Destination Address Address Type Destination Port
------------------- ------------ ----------------
00.06.5b.69.3d.be Dynamic FastEthernet1/23