Lcd display features – Numark Industries CD MIX-1 User Manual
Page 8
CD MIX-1
- The Leader in DJ Technology
©1999 Numark Industries
- 8 -
http://www.numark.com
LCD DISPLAY FEATURES
1.
PLAY - Active while the unit is actually playing a CD.
2.
PAUSE - Active when the unit is paused.
3.
CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a
cue point.
4.
PROGRAM - Used for pre-programming the track order to automatically be played by the unit.
This is a great function if you need to leave the CD player alone.
5.
TIME MODE -
(Elapsed) is for showing time as it is taking place.
(Remain) shows how much time is left on a particular track. This function is controlled by the TIME
BUTTON.
6.
SINGLE - Shows when the unit is set to play just one track at a time. When this is not lit, the CD
will play continuously through all tracks. This function is controlled by the SING/CONT BUTTON.
7.
PITCH - Is lit when the PITCH BUTTON is active.
8.
TIME BAR - Shows either time remaining or elapsed depending on the setting of the TIME
BUTTON.
9.
PITCH/BPM - Shows the percentage change in pitch or current BPM.
10.
TRACK - Shows the current track that the unit is playing.
11.
MINUTES - Shows the minutes elapsed or remaining depending on mode setting.
12.
SECONDS - Shows the seconds elapsed or remaining depending on mode setting.
13.
FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows
the frames elapsed or remaining depending on mode setting.