Nokia BH-109 - Manual (Page 4)

Charge the battery
Before using the headset, you must charge the battery.
Warning:
Use only chargers approved by Nokia for use with this particular model. The use of any
other types may invalidate any approval or warranty, and may be dangerous. Use of
unapproved chargers may present a risk of fire, explosion, or other hazard.
When you unplug a charger, hold and pull the plug, not the cord.
1 Connect the charger to a wall outlet.
2 Connect the charger cable to the charger connector in the headset. The red indicator
light turns green when the battery is fully charged.
3 Disconnect the charger from the headset, then from the wall outlet.
The fully charged battery has power for up to 8 hours of talk time and up to 200
hours of standby time.
When the battery charge is low, the headset beeps every 5 minutes and the red indicator
light flashes.
Check the battery charge
With the headset connected to the mobile device, press the power key. Green light
indicates sufficient charge level. If the light is yellow, you may need to recharge the
battery soon. If the light is red, recharge the battery.
Switch the headset on or off
Press and hold the power key for 2 seconds.
When switched on, the headset beeps, and a green indicator light flashes once. The
headset tries to connect to a paired mobile device.
If the headset is not connected to a device within 30 minutes, it switches off.
When switched off, the headset beeps, and a red indicator light flashes once.
Pair and connect the headset
With pairing, you can control which devices are allowed to connect to your headset.
Before using the headset, you must pair and connect it to a compatible device.
1 Switch the headset off and the compatible device on.
4