Newcon Optik NEWCON Image Stabilizer SIB 16X40 - Manual (Page 2)

IMPORTANT INFORMATION
Read prior to activation
You have just purchased a complicated electronic device. To
operate it properly, please read this manual carefully. Here are
some common precautions that must be noted.
• NEVER hit the unit while operating or being transported
• NEVER transport the unit without the case
• NEVER disassemble the unit. This device contains high speed
rotating parts, which may be hazardous to you!
• NEVER engage the stabilizing mode while the power supply
control indicator is not glowing or less than 1 minute after
activating the unit
• NEVER turn off the unit while stabilizing mode is engaged
• NEVER reverse the polarity of a battery
• ALWAYS remove batteries when not in use for a long period
• ALWAYS keep the objective lenses covered when not in use
• ALWAYS store in a warm dry place when not in use
2
10. QUALITY CERTIFICATE
The SIB 16x40 GR is suited for usage.
Production date _____________________________
Serial number ______________________________
Quality Inspector signature _____________________
Purchase date ______________________________
Salesman __________________________________
Quality assurance seal