Nilfisk-Advance America C 100.5 - Manual (Page 5)

6
3 Before you start using your
pressure
washer
3.2 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet
fi lter (2a) must al-
ways be fi tted in
the water inlet
pipe to fi lter out
sand, lime stone and
other impurities as these will
damage the pump valves.
Caution: Failure to fi t the fi lter
will invalidate the guarantee.
3.1 Mounting of trolley
handle (models with trol-
ley handle)
3.3 Mounting of high pres-
sure hose on spray gun
1. Attach the high pressure
hose (4) to the spray gun (7).
Detach the high pressure
hose by pressing the pawl
(A).
1. Place the trolley handle on
the machine.
2. Secure the handle by mount-
ing the 2 screws. Use the
enclosed hexagon key.