NAD T 763 - Manual

• 6 x 100W Simultaneous Minimum Continuous Power
into 4 / 8 ohms
• 210W, 300W, 370W IHF Dynamic Power into 8, 4
and 2 ohms, respectively
• PowerDrive™
• High Current Holmgren™ Toroidal Power
Transformer
• Dolby Digital, Dolby Digital EX, ProLogic II, DTS, DTS
ES, DTS NEO:6, Matrix 7.1, EARS and
Enhanced Stereo
• HDCD®
• Stereo Bypass
• 5 A/V Custom Presets store unique speaker level and
tone control settings
• Direct access speaker level adjustment for surround,
center and subwoofer
• 6 A/V Inputs all S-Video and Composite,
2 full tape loops
• Component Video, 3 Inputs and 1 Output,
HDTV Compatible
• 3 Audio Inputs, 1 Tape Loop
• 6 Digital Inputs, 4 Coaxial, 2 TOS Link
freely assignable
• 2 Digital Outputs, 1 Coaxial, 1 TOS Link
• 7.1 Analogue Input (for DVD-Audio)
• Speaker A + B switching (Speakers B stereo only)
• Multi-Source 2nd zone A/V pre-out with independent
source and volume
• ZR-2 Second Zone Remote included, discrete codes
for independent zone
• 2 x IR Outputs, One IR input
• RS-232 port interface for advanced control systems
• 3 x 12V Trigger Outputs, 12V Trigger Input
• IEC Detachable Power Cable
• Preamp Outputs for all 7.1 channels (2 Subwoofers)
• Amplifi er Input for 6 Power Amps
• DS FM/AM Tuner with 30 direct access presets
• NAD Soft Clipping™
• HTR-2 - 8 Device Illuminated Learning Remote with
Macro function
The NAD T 763 is heir to many generations of award
winning NAD designs. This exceptional pedigree is
evident in both the look and the feel of the T 763, and it is
unmistakable the moment you listen. Based on the highly
successful T 762, the T 763 boasts detail improvements
in virtually every area of the receiver, for a cumulative
effect that is fully deserving of the new model number.
Starting with a revised heat management system that
reduces internal operating temperatures even under
the most severe operating conditions, along with a new
volume control circuit and input switching circuit to further
reduce noise and distortion. Operating software is now
upgradable via the RS-232 port for an added degree of
“future proof” operation.
Performance
Today’s advanced Surround Sound receivers require
quality in both the digital decoding stages and the
analogue amplifying stages for the best overall
performance. The T 763 is an excellent example of the
NAD Design Team’s expertise in both areas.
Using the latest high speed DSP technology, NAD
was able to include the newest surround formats from
Dolby and DTS, as well as including NAD’s own highly
regarded music surround mode, the EARS (Enhanced
Ambient Recovery Circuit) circuit. Unlike the typical
artifi cially enhanced DSP modes like “Club”, “Stadium”,
and “Church”, EARS uses DSP technology to extract the
natural ambience to create surround sound from any 2
channel source inducing a warm natural reverberant effect
without the artifi cial “BOING”. Surround processing is
automatically detected via the digital inputs of the T 763,
and the “highest” or most advanced form of decoding is
switched in. Conversion of the decoded digital bitstream
is performed with high resolution and extremely linear
D/A Converters carefully selected for their performance
capabilities.
T 763 A/V Receiver