Nokia BH-102 - Manual (Page 4)

ENGLISH
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
Chargers
This device is intended for use when
supplied with power from the following
chargers: AC-3, AC-4, AC-5, and DC-4.
Warning: Use only chargers
approved by Nokia for use
with this particular
enhancement. The use of any other types
may invalidate any approval or warranty,
and may be dangerous.
When you disconnect the power cord of
any enhancement, grasp and pull the
plug, not the cord.
Charge the battery
Before charging the battery, carefully
read “Battery information”.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector (8). The
indicator light is on during
charging. Charging the battery
fully may take up to 2 hours.
3. When the battery is fully charged,
the indicator light turns off.
Disconnect the charger from the
headset and the wall outlet.
The fully charged battery has power
for up to 10 hours of talk time or up to
250 hours of standby time.
When battery power is low, the
headset beeps once every minute and
the indicator light flashes quickly.