Navman FUEL 2100 - Manual (Page 4)

FUEL 2100 Installation and Operation Manual NAVMAN 4
Fuel Flow
Press the key to display the current fuel flow
rate.
TOTAL FLOW ^ V
Other Fuel Functions
Press the key to cycle through the possible
functions. Each time the key is pressed the display
will show an identifier for 2 seconds before the value
is displayed.
Fuel used on trip
TOTAL V
tOt
Fuel used in total
TOTAL V
ALr
Low fuel alarm setting
GAS
TOTAL V
Fuel remaining in tank
Changing the fuel remaining value
To change the value of fuel remaining in the tank,
press the
key until the display indicates for
two seconds and then displays the current value.
TOTAL FLOW ^ V
Press and hold both keys for three seconds and the
displayed value will begin to flash.
Press and hold for 3 seconds
260
Use the and keys to change the value. Press
and hold both keys for one second to save this new
value to memory and to exit this function. The display
will indicate
and then the new value.
1 Operation
#
"