Norton Abrasives Cut-Off Wheels For Metal Fabrication - Manual (Page 8)

GOOD
GEMINI, MASONRY
BETTER
Norton Cut-Off Wheel Line
TECH tips
❚❚ Run the cut-off machine at the highest possible speed marked on the wheel.
❚❚ Long Life wheels should be used on a cut-off machine with 1 horsepower for every inch of wheel diameter.
With a less powerful machine, we recommend starting with a Free Cut specification.
Large Diameter Reinforced Cut-off Wheels for
Stationary Saws (10" – 24")
FEATURES BENEFITS
23A
• Aluminum oxide abrasive, D sides • Engineered for fast cut and long life on a variety of applications
U57A
• Aluminum oxide abrasive, centrally reinforced rough sides • Engineered for fast cut and long life on a variety of applications
57A – B25N WHEELS
• Constructed with full diameter side reinforcing, resin bond • Versatile; durable, free cutting; offer greatest stiffness
CHARGER
• A blend of premium zirconia alumina and aluminum oxide • Outperforms standard aluminum oxide up to 3X in life
• High performance bond system • Over 25% better cut rate than standard aluminum oxide wheels
Large Diameter Stationary Reinforced Cut-off Wheels BETTER
FEATURES BENEFITS
GEMINI
• Quality aluminum oxide abrasive • Sets the aluminum oxide industry standard for cutting all material
in metal fabrication applications
NORTON MASONRY
• Sharp silicon carbide grain • Engineered for all masonry materials
GOOD Large Diameter Stationary Reinforced Cut-off Wheels
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO.* UPC NO. SPEC/PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF – STEEL/STAINLESS/MASONRY
10 X 1/16 X 5/8 6,110 25 57A461-TB25N 66253122817
10 X 3/32 X 5/8 6,110 10 CO10332CH 66253106108 CO10332GFC 66253106101
10 CO10332GLL 66253106102
10 CO10332MA 07660789391
25 57A364-TB25N 66253122823
10 X 1/8 X 5/8 6,110 25 57A244-TB25N 66253122826
12 X 3/32 X 1 5,095 10 23A364-RB25B 66253261999
12 X 1/8 X 1 5,095 10 CO1218CH 66253207550 CO1218GFC 66253207547
CO1218GLL 66253207548
14 X 1/8 X 1 4,365 10 CO1418CH 66253306623 CO1418GFC 66253306609
CO1418GLL 66253306611
16 X 1/8 X 1 3,820 10 U57A304-TB25B 66253464694
16 X 5/32 X 1 3,820 10 U57A304-TB65B 66253464576 CO16532GFC 66253410183
CO16532CH 66253410194 CO16532GLL 66253410184
18 X 5/32 X 1 3,015 10 CO18532G 66253410185
20 X 5/32 X 1 2,710 5 CO20532CHFC 69078609045 CO20532GFC 69078609031
5 CO20532CHLL 69078609046 CO20532GLL 69078609032
10 U57A244-TB25B 69078666948
20 X 3/16 X 1 2,710 5 CO20316GFC 69078609033
CO20316GLL 69078609034
24 X 3/16 X 1-3/4 2,260 10 U57244-RB25B 69083166319
NOTE: “N” INDICATES SIDE REINFORCED, “B” INDICATES INTERNALLY REINFORCED.
new
look!
STATIONARY CHOP
STROKE MACHINE
STEEL/METAL
STAINLESS
MASONRY
ALUMINUM
It is the user’s responsibility to refer to and
comply with ANSI B7.1
8 www.nortonabrasives.com