NEC LCD1525X - Manual (Page 2)

English-1
English
Caution:
When operating the MultiSync LCD1525X with a 220-240V AC power source in Europe
except UK, use the power cord provided with the monitor.
In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for
use with this equipment. If a power cord is not supplied with this equipment please contact
your supplier.
When operating the MultiSync LCD1525X with a 220-240V AC Power source in Australia, use
the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the power outlet and has
been approved by and complies with the safety standard of your particular country.
For detailed information about the power cord please contact your supplier or your NEC Sales
Office.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN
EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE
COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD
IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM
THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have
sufficient magnitude to cause electric shock. Therefore, it is dangerous to make
any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation
and maintenance of this unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
CAUTION
WARNING
RISK OF ELECTRIC SHOCK • DO NOT OPEN
E NERGY S TAR is a U.S. trademark.
As an E NERGY S TAR
® Partner, NEC-Mitsubishi Electronics Display of America, Inc. has determined that this product meets the
E NERGY S TAR guidelines for energy efficiency. The E NERGY S TAR emblem does not represent EPA endorsement of any product or
service.
IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
Safety Instruction