Nady Systems MPM 4130 - Manual (Page 9)

POWER AMP, MAX. OUTPUT POWER IN WATTS (RMS)
Number of Power channels ......................................
1
8Ω ..................................................................... 100W
4Ω ..................................................................... 130W
INPUTS
Balanced mono Mic/Line channels ..........................
4
2T input .................................................................... 1
OUTPUTS
Main out ..........................................
TRS, unbalanced
CHANNEL STRIPS
Volume controls ...............................................
Rotary
MASTER SECTION
Rotary Fader ...................................................
Master
BUILT-IN DIGITAL EFFECT ................................................................................................Digital Delay (80ms, 120ms, 160ms, 200ms)
NOISE (20Hz to 20KHz bandwidth, line Master output)
Master output, all faders down .........................
-82dB
Power amp output, all faders down .................. -55dB
THD
Power output, 20Hz to 20KHz .....
<0.1% @100W/4Ω
CROSSTALK (1KHz @ 0dBu, 20Hz to 20KHz Bandwith, channel in to master output)
Channel fader down .......................................
<-65dB
FREQUENCY RESPONSE (Mic input to output)
20Hz ~ 20KHz, line level o/p @ +4dBu into 600 Ω ........................................................................................................................... ±2dB
20Hz ~ 20KHz, power amp o/p 1 watt into 8 Ω
±2dB
SENSITIVITY @ MIXER OUTPUT +4dBu
Mic/Line ..................................................
-42dB/-22dB
Tape in .............................................................. -10dB
CHANNEL EQUALIZATION
Low EQ ..............................................
80Hz (+/-15dB)
Hi EQ ............................................... 12KHz (+/-15dB)
MICROPHONE PREAMP E.I.N. (150Ω Terminated, max. Gain) ............................................................................................ <-102dBm
POWER CONSUMPTION .......................... 200 watts
POWER REQUIREMENTS ...................................................................................................................100-120, 220-240 VAC, 50-60 Hz
FUSING ................................................. 5x20mm glass type, 4A/250V for 115VAC, and 2A/250V for 230VAC operation, fast-blow fuse
DIMENSIONS (W x H x D) ................................................................................................. 17.52” x 8.62” x 5.87” (445 x 219 x 149 mm)
WEIGHT .......................................... 18.45 lbs (8.4kg)
SPECIFICATIONS
9
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.