Netac Tech C675 - Manual (Page 2)

6. Others
6.1 Remarks
1. “F***.MP3 / V***.MP3 / L***.MP3 or “F***.WAV / V***.WAV / L***.WAV” are
auto-generated default titles for FM, VOICE and LINE IN recorded files in MP3
Player. “*” presents as “0~9”.
2. Don’ t delete the system file which name is “SETTINGS.DAT” under root directory
of MP3 Player, because it saved the latest settings, otherwise the settings would
be returned to original settings when next power on.
3. Files or data stored in MP3 Player cannot completely avoid being destroyed or lost
due to improper use or other reasons. Please backup files and data when necessary.
4. Netac provides the repair service during warranty period in promised support
range. This product is not guaranteed for its compatibility with all kinds of
computers and Operating System. Netac Technology Co., Ltd. is not responsible
for any loss arising out of using this product. The governing laws for this product
are laws of the People’ s Republic of China.
6.2 FAQ
If you experience any of the following difficulties in using MP3 Player, use the following
guide for help. Should any problem persist, contact with Netac Customer Service.
6.4 RMA Service
1. Self check: (Over 50% claimed fault can be fixed easily)
A.) Please check the manual on our website, http://www.netac.com to double
check the failure symptoms you are facing.
B.) Please check if there is any latest update of software or firmware to your
product, especially format tools.
C.) If you didn’ t purchase directly from Netac, please return the goods to the
vendor where you purchased from for repair or replacement.
ANY PHYSICAL DAMAGE, MISUSAGE, OR UNAURHORIZED DISASSEMBLING OF
ANY PART OF THE PRODUCTS WILL LEAD TO WARRANTY VOID. By default, the
product is only available for family and office.
2. Obtain RMA (Return Merchandise Authorization) number from Netac (Only for
Authorized Dealers)
A.) We send you a RMA Request Form by E-mail upon request;
B.) Please fill in all related items, like items number, failure symptom, purchase
date and invoice number on RMA Request Form, E-mail or Fax back to
Netac;
C.) Upon receiving the filled RMA Request form, we will check the form and
warranty period. A RMA number will be issued within 2 working days;
D.) Any RMA number is only valid for 14 days, other than that a new application
needs to be filled again.
ANY RETURN WITHOUT PRE-APPROVED RMA NUMBER WILL BE REJECTED OR
DELAYED. IT IS A MUST-HAVE FOR ALL RETURNS OR REPAIRING OR EXHCNAGE
OR MISSING ISSUES.
3. How to send the defective product(s) to Netac.
The “ Netac RMA REQUEST FORM” must NOT be enclosed in the RMA package sent to
Netac, but the RMA number is REQUIRED to be written on the top of the box when you
send it/them back. The defective product(s) sent to Netac without RMA number will NOT
be received, repaired and/or returned.
A.) Netac doesn’ t accept any collect shipment. All RMA shipment must be
prepaid.
B.) Don’ t make any shipment until having the Shipping Instruction from Netac.
Please ask further advice from Netac Customer Service Dept. as below
before you send out the defective products.
4. Contact information:
Email address: [email protected]
Contact: Byele Yu, Coudy Wu (Customer Service Dept.)
Contact phone: +86-755-26727573, 26727336
Business Hour: 08:30 - 17:40 Beijing Time, Mon.- Fri.
6.5 Contact Netac
Netac Technology Co., Ltd.
6F, Incubator Building,
China Academy of Science & Tech Development,
No.1 High-tech South St,
Shenzhen, China 518057
Tel: +86-755-26727800 (Switchboard)
+86-755-26727520, 26727510, 26727500 (Technical Support)
Fax: +86-755-26727610
Website: http://www.netac.com
Email: [email protected] (Sales)
[email protected] (Technical Support)
[email protected] (Feed back)
6.3 Specifications
* The actual useable capacity may not be identical as labeled.
Netac reserves the rights to make changes on any specification without prior notice.
l Synchronous Line In (Only supports MP3 format): While there is no voice output,
MP3 Player would save the recorded file, and start to another record automatically
when there is voice output.
l MP3 Player would return to the first recorded file while stop recording.
3) Press Play/Pause button to pause/resume recording, and press REC button to
stop recording.
4) MP3 Player can rename and save for the recorded files when finish recording. The
details are as the following:
Note:
1) Please ensure that MP3 Player is power enough to record.
2) MP3 Player would display “ Low Power Exit Recording !” when the battery is
exhausted, please change the new battery for recording.
3) MP3 Player would display “MMC/SD card write protected !” when you copy, delete,
or edit data on SD/MMC Card and recorded files saved in SD/MMC Card, because
it has been writing protected.
5.4 Setting Menu
l
Press Previous/Next button to select the item, press MENU button to enter.
l Press Previous/Next button to set the value, press MENU button to confirm and
return to Setting Menu.
l Hold MENU button to exit current menu under settings sub menu.
You can set the following items in “Setting Menu”:
Play All, Repeat Track, Repeat All, Shuffle, Shuffle Repeat.
(Source): To set the source as (MIC), (FM) or (LINE IN). Press Next button to enter
(Encoder): To set the encoder as MP3, IM ADPCM, MS ADPCM or PCM. Press Next button
(Channel): To set the channel as (Stereo) or (Mono). Press Next button to enter “Save”.
Note: The Channel can be only set as (Mono) when (Source) is set as (MIC).
(Save): Press MENU button to set store folder for the recorded file as in:
(MP3 Player) or (SD/MMC Card). Press Next button to enter “Sample”.
(Sample): Press MENU button to set the sample as: 32000Hz, 44100Hz, or 48000Hz when
(Bit Rate): To set the Bit Rate as 96KBPS, 112KBPS, 128KBPS, 160KBPS, 192KBPS, or
5.5 About
Press MENU button to enter to browse the system information, which includes Ver
(version), Int (the capacity of MP3 Player), Ext (the spare capacity). Press MENU
button to exit.