Fine tuning flow chart – NHT X2 User Manual

Page 11

System Status Indicators (Front Panel)

Located on the right hand side of the front panel are two LEDs. They are used to indicate the func-
tional status of the X2 Crossover.
P - Power LED (green) - indicates the X2 is on and in a ready condition.
S - Standby LED (amber) - indicates the X2 crossover is in "standby" mode.
8.5 Fine Tuning Chart

The chart below was developed to assist you in the further fine tuning of your subwoofer or tower sys-
tem. Should you be unable to achieve satisfactory performance from your subwoofer system using
the fine-tuning chart, contact your authorized NHT dealer or call our Customer Hotline at 1-800-NHT-

"Boomy"

Too Much

Mid / Upper

Bass

Problem

Solution

Lacks

Low

Bass

Weight

Excessive

Low

Bass

Weight

Lacks

Mid / Upper Bass:

Lean But With

Weight

Fine Tuning Flow Chart

Lower

Low Pass

X-Over

Frequency

Increase

Boundary

Decrease

Boundary

Adjust

Subwoofer

Volume

Listen

If this makes

it worse,

try

If the sound

improves

Raise

Low-Pass

Setting

Adjust

Subwoofer

Volume

Adjust

Subwoofer

Phase

Listen

Lower

Subwoofer

Volume

Move

Subwoofer

Closer to

Wall

Move

Subwoofer

Farther

From Wall

Adjust

Subwoofer

Phase

0-90

(Continuously

Add)

Adjust

Subwoofer

Phase

0-90

(Continuously

Add)

Adjust

Subwoofer

Phase

Switch

0-180

Listen