NAD T585 - Manual (Page 15)

SYSTEM SETUP MENU
paSSword
PASSWORD is needed to gain access to the “Rating” and “Country Code”
items of the PARENTAL CONTROL setup menu section.
1 While at “Password” line menu, press [ENTER].
2 “New Password _ _ _ _” will appear indicating that you have to enter
a new password. “New Password _ _ _ _” will only be available when
you use for the first time your T 585 or when you have restored it to its
default settings.
3 Input your desired 4-digit password and then press [ENTER].
4 Upon entering your new password, “Verify _ _ _ _” will appear
prompting you to re-enter the same 4-digit password to verify entry of
correct password.
5 Press [ENTER] to confirm password entry. Your new password is now
activated.
An existing password can be changed through the following steps.
1 While at “Password” line menu, press [ENTER].
2 “Old Password _ _ _ _” will appear indicating that you have to enter your
existing password.
3 Input your existing 4-digit password and then press [ENTER].
4 “New Password _ _ _ _” will appear indicating that you now have to
enter a new password.
5 Upon entering your new password, “Verify _ _ _ _” will appear
prompting you to re-enter the same 4-digit password to verify entry of
correct password.
6 Press [ENTER] to confirm password entry. Your new password is now
activated.
NOTE
If the password entered is incorrect, you will remain in the same menu
screen like “Old Password_ _ _ _” or “Verify _ _ _ _”. You cannot move
forward to the next sequence unless the correct password is entered.
Press [ ] to exit the sequence if you are unable to enter the correct
password.
reStore SettingS
If you desire to reset the T 585 and restore all its factory default settings, the
following steps should be followed.
1 While at “Restore Settings” line menu, press [ENTER].
2 At “Yes” menu line, press [ENTER].
3 “Password _ _ _ _” will appear. In quick succession, press 5851 for North
American version model or 5852 for Europe version model.
4 “Load default AH Setting!” (North American version) or “Load default C
Setting!” (Europe version) will be shown in OSD – this indicates that the
T 585 is already restored to its factory default settings.
otherS
pbc : Set Playback Control (PBC) to On or Off.
on: Video CDs with PBC are played according to the PBC.
off: Video CDs with PBC are played the same way as Audio CDs.
autoplaY : You can set up the DVD Player to automatically start disc
playback upon loading of a DVD disc. If Auto Play mode is set to ON, this
DVD player will search for the title that has the longest playback time and
then play back the title automatically.
on: Auto Play function is active.
off: Auto Play function is not active.
NOTE
The Auto Play function may not work for some DVDs.
OPERATION
uSing the t 585 – Setup menu
15
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ