Niles Audio RS 5s - Manual (Page 15)

2. Take the nylon security cable, supplied with the loudspeaker and fold it in half.
Using the middle of the cable, feed it through the Security Attachment Eyelet as
shown in Figure 8.
3. Feed the opposite end of the nylon security cable through the exposed portion
of the cable that was just fed through the security eyelet, as shown in
Figure 9 and 10.
4. Pull the ends of the security cable with the loops as tight as you can until the
knot around the security eyelet is tightened as shown in Figure 11.
IN
ST
A
LL
A
TIO
N
14
Figure 12 Security Stake
Attachment to Cable
Figure 11 Security Cable
Connected and Tightened
Figure 13 Security Stake
Driven into Ground