NEC FE750 Plus - Manual (Page 12)

10
Specifications
Monitor MultiSync ® FE
750
+ ™ Notes
Specifications Monitor
Picture Tube Diagonal: 17 inch 90 ° deflection, 0.25 mm grille pitch,
Viewable Image Size: 16 inch medium short persistence phosphor,
Radius: 50,000 mm aperture grille CRT, multi-layered, anti-static
screen coating, dark-tint screen and
OptiClear
® screen.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 31 kHz to 96 kHz Automatically
Range Vertical: 55 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 60 to 160 Hz Some systems may not support
Resolution based on horizontal and 800 x 600 @ 55 to 146 Hz all modes listed.
vertical frequencies only 832 x 624 @ 55 to 141 Hz
1024 x 768 @ 55 to 116 Hz
1152 x 870 @ 55 to 103 Hz
1280 x 1024 @ 55 to 89 Hz ..................... NEC-Mistubishi Electronics Display cites
1600 x 1200 @ 55 to 76 Hz
recommended resolution at 85 Hz for
optimal display performance.
Active Display Area Horizontal: 315 mm/12.4 inches Dependent upon signal timing used,
(Factory Setting) Vertical: 236 mm/9.3 inches and does not include border area.
Active Display Area 325 mm/12.8 inches Dependent upon signal timing used,
(Full Scan) 244 mm/9.6 inches and does not include border area.
Power Supply AC 100–120 V/220-240 V, 50/60 Hz
Current Rating 1.3A @ 100-120 V, 0.6 A@ 220-240 V
Dimensions 399 mm (W) x 413 mm (H) x 415 mm (D)
15.7 inches (W) x 16.3 inches (H) x 16.4 inches (D)
Weight 19.0 kg
41.9 lbs
Environmental Considerations
Operating Temperature: +10 °C to +35°C / +50°F to +95°F
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -20 °C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
Fe750+.wpc 11/1/00, 10:45 AM 12